Vogue Spiral Stair Kit AccessoriesAccessories for your Vogue Spiral Staircase Kit
|
 |
 | Straight Stairwell Balustrading Details for Vogue Spiral Stair Kit
The straight balustrading kit features 4 spindles, sectional handrail and all fittings and instructions. (You will find more information on our Advice & Downloads pages.) The height of the balustrading is 1055mm and each kit will be suitable for 1m length.
If you are joining more than two straight balustrade kits together, we recommend that you purchase an additional strengthening support post as shown below.
PLEASE NOTE: It is your responsibility to ensure that any Local Authority approvals necessary have been obtained. This will vary according to your application and we advise you to always check before going ahead with a purchase. |
|
|
|
|
|
|
|
|
 | Circular Stairwell Balustrading Details
The circular balustrading kit features 4 spindles, curved sectional handrail and all fittings and instructions. (You will find more information on our Advice & Downloads pages.) The height of the balustrading is 1055mm and each kit will be suitable for 1m length.
The circular balustrading kit is available in three size options, designed with a curve to fit three different opening sizes as shown on the image below. (Click on image to enlarge it.)
 |
|
|
|
|
Additional Tread Kit for the Vogue Spiral Stair KitEach tread kit comprises, the tread, centre column, balustrade posts, handrail section plus all the required fittings. You can install additional tread kits to take the spiral staircase up to a floor to floor height of approx 3500mm. |
|
|
|
|
|
|
|
 | Vogue Spiral Stair Kit RiserBar Kit Info
The riserbar kit allows you to install a horizontal bar between each of the treads to ensure that the open gap between the treads is less than 100mm to ensure compliance with the UK Building Regulations' 100mm gap rule.
If you are buying additional treads for your Vogue Spiral Staircase for your floor to floor height, you will need to buy additional riserbars too. |
|
|
|
|
|
|
|
|
StaircaseKits Grip Strip InfoPeople have sometimes asked us if there is a way of adding some extra non-slip treatment to the wooden treads of their staircase, just to make absolutely certain that it's feet and not bottoms that land on the treads! After considerable research, we are pleased to provide the answer with our unique staircase accessory - StaircaseKits Grip Strip.
The StaircaseKits Grip Strip is a transparent and strong strip with a textured anti-slip surface which is impregnated with diamond hard aluminium oxide on a pressure sensitive adhesive base. It is tough and durable but friendly on bare feet. Just one length of the 25mm wide (1") StaircaseKits Grip Strip applied near the front edge of your stair tread will give superb grip while letting the beauty of your wooden treads shine through. It is so effective that it can even be used in showers, wet rooms, on boats or around pool areas. Qucik and easy to apply, not only is it virtually invisible but it's also flexible, durable and cleanable.
Available in four sizes:
SMALL (suitable for spacesaver stairs)
MEDIUM (suitable for 1200mm spiral stairs)
LARGE (suitable for 1400-1600mm spiral stairs or 700mm wide Stilo or Vector modular stair)
EXTRA LARGE (suitable for 830mm wide Stilo or Vector modular stair) |
|
|
|
|
|
|
|
|
|
